Hydraulic hose

Choose North American Hose & Fittings for the hydraulic hose and fittings that keep your equipment up and running. We stock hose in a range of diameters and operating pressures, and build it into assemblies for custom applications.

General-purpose assemblies have a rugged synthetic rubber cover built for durability and extreme temperatures. From low pressure to ultra-high pressure, we'll match the hose to the job and the fluid.

Request a quote (225) 383-9213

Find the hose that holds your pressure

Pick a size and working pressure. We'll list the hose types that meet it.

Figures come from the hose data sheets on this site. Confirm your application with our counter before you order.

Hose specifications

Seven hose types, with every rating in one table. Scroll sideways on a phone.

F1SN

General-purpose single-braid hose for mid-pressure lines.

Reinforcement: One steel wire braid
Tube and cover: Synthetic rubber, MSHA flame retardant approved cover
Temperature: Hydraulic oils: -40°F to +212°F (-40°C to +100°C), with occasional peaks to +257°F (+125°C). Polyglycol oils, water-oil emulsions and water: up to +185°F (+85°C).

Hose	Hose ID			Reinforcement dia.		Outside dia.		Working pressure		Burst pressure		Bend radius		Weight
Hose	DN	inch	size	mm	in	mm	in	bar	psi	bar	psi	mm	in	kg/m	lb/ft
1SN-04	6	1/4"	04	11.1	0.437	13.2	0.520	225	3,250	900	13,000	100	3.94	0.21	0.14
1SN-05	8	5/16"	05	12.7	0.500	14.5	0.571	215	3,100	860	12,400	115	4.53	0.24	0.16
1SN-06	10	3/8"	06	15.1	0.594	17.2	0.677	180	2,600	720	10,400	125	4.92	0.33	0.22
1SN-08	12	1/2"	08	18.0	0.709	20.4	0.803	160	2,300	640	9,200	180	7.09	0.41	0.28
1SN-10	16	5/8"	10	21.2	0.835	23.5	0.925	130	1,900	520	7,600	200	7.87	0.45	0.30
1SN-12	19	3/4"	12	25.2	0.992	27.5	1.083	105	1,500	420	6,000	240	9.45	0.58	0.39
1SN-16	25	1"	16	33.1	1.303	35.4	1.394	88	1,250	352	5,000	300	11.81	0.88	0.59
1SN-20	31	1-1/4"	20	40.2	1.583	43.5	1.713	63	920	252	3,680	420	16.54	1.23	0.83
1SN-24	38	1-1/2"	24	46.7	1.839	50.0	1.969	50	725	200	2,900	500	19.69	1.51	1.01
1SN-32	51	2"	32	60.2	2.370	63.6	2.504	40	580	160	2,320	630	24.80	1.97	1.32
1SN-40	63	2-1/2"	40	73.0	2.874	76.5	3.012	40	580	160	2,320	760	29.92	2.54	1.71
1SN-48	76	3"	48	85.0	3.346	88.5	3.484	35	500	140	2,000	900	35.43	2.71	1.82

F2SN

Double-braid hose for higher pressure in the same small-bore sizes.

Reinforcement: Two steel wire braids
Tube and cover: Synthetic rubber, MSHA flame retardant approved cover
Temperature: Hydraulic oils: -40°F to +212°F (-40°C to +100°C), with occasional peaks to +257°F (+125°C). Polyglycol oils, water-oil emulsions and water: up to +185°F (+85°C).

Hose	Hose ID			Reinforcement dia.		Outside dia.		Working pressure		Burst pressure		Bend radius		Weight
Hose	DN	inch	size	mm	in	mm	in	bar	psi	bar	psi	mm	in	kg/m	lb/ft
2SN-04	6	1/4"	04	12.7	0.500	15.0	0.591	400	5,800	1600	23,200	100	3.94	0.33	0.22
2SN-05	8	5/16"	05	14.3	0.563	16.4	0.646	350	5,075	1400	20,300	115	4.53	0.39	0.26
2SN-06	10	3/8"	06	16.7	0.657	18.8	0.740	330	4,785	1320	19,140	125	4.92	0.50	0.34
2SN-08	12	1/2"	08	19.8	0.780	22.2	0.874	275	3,990	1100	15,960	180	7.09	0.59	0.40
2SN-10	16	5/8"	10	23.0	0.906	25.2	0.992	250	3,625	1000	14,500	200	7.87	0.71	0.48
2SN-12	19	3/4"	12	27.0	1.063	29.3	1.154	215	3,120	860	12,480	240	9.45	0.86	0.58
2SN-16	25	1"	16	34.9	1.374	37.2	1.465	165	2,395	660	9,580	300	11.81	1.28	0.86
2SN-20	31	1-1/4"	20	47.3	1.862	48.3	1.902	125	1,815	500	7,260	420	16.54	2.02	1.36
2SN-24	38	1-1/2"	24	50.8	2.000	53.7	2.114	90	1,305	360	5,220	500	19.69	2.23	1.50
2SN-32	51	2"	32	63.5	2.500	66.7	2.626	80	1,160	320	4,640	630	24.80	2.85	1.92
2SN-40	63	2-1/2"	40	75.8	2.984	79.3	3.122	69	1,000	276	4,000	760	29.92	3.81	2.56
2SN-48	76	3"	48	87.8	3.457	91.3	3.594	50	725	200	2,900	900	35.43	4.04	2.71

R17 (SK117)

Compact single-braid hose with a tighter bend radius. Also offered with HARC cold-weather or UHMPE abrasion covers.

Reinforcement: One steel wire braid
Tube and cover: Synthetic rubber, MSHA flame retardant approved cover
Temperature: Hydraulic oils: -40°F to +212°F (-40°C to +100°C), with occasional peaks to +257°F (+125°C). Polyglycol oils, water-oil emulsions and water: up to +185°F (+85°C).

Hose	Hose ID			Reinforcement dia.		Outside dia.		Working pressure		Burst pressure		Bend radius		Weight
Hose	DN	inch	size	mm	in	mm	in	bar	psi	bar	psi	mm	in	kg/m	lb/ft
SK117-04	6	1/4"	04	10.4	0.409	12.7	0.500	290	4,200	1160	16,800	40	1.57	0.18	0.12
SK117-05	8	5/16"	05	11.5	0.453	14.2	0.559	250	3,600	1000	14,400	55	2.17	0.21	0.14
SK117-06	10	3/8"	06	13.6	0.535	16.6	0.654	230	3,300	920	13,200	65	2.56	0.28	0.18
SK117-08	12	1/2"	08	17.4	0.685	20.0	0.787	210	3,000	840	12,000	90	3.54	0.36	0.24
SK117-10	16	5/8"	10	20.4	0.803	23.0	0.906	130	1,900	520	7,600	150	5.91	0.41	0.28
SK117-12	19	3/4"	12	23.8	0.937	26.7	1.051	105	1,500	420	6,000	180	7.09	0.52	0.35
SK117-16	25	1"	16	31.3	1.232	34.0	1.339	88	1,250	352	5,000	230	9.06	0.78	0.52
SK117-20	31	1-1/4"	20	40.2	1.583	44.6	1.756	100	1,430	400	5,800	300	11.81	1.28	0.85

SK216

Compact two-braid hose for high pressure in tight routing. Also offered in HARC, smooth-finish and UHMPE covers.

Reinforcement: Two steel wire braids
Tube and cover: Synthetic rubber, MSHA flame retardant approved cover
Temperature: Hydraulic oils: -40°F to +212°F (-40°C to +100°C), with occasional peaks to +257°F (+125°C). Polyglycol oils, water-oil emulsions and water: up to +185°F (+85°C).

Hose	Hose ID			Reinforcement dia.		Outside dia.		Working pressure		Burst pressure		Bend radius		Weight
Hose	DN	inch	size	mm	in	mm	in	bar	psi	bar	psi	mm	in	kg/m	lb/ft
SK216-04	6	1/4"	04	11.5	0.453	13.8	0.543	450	6,500	1800	26,000	45	1.77	0.29	0.19
SK216-05	8	5/16"	05	13.0	0.512	15.6	0.614	420	6,000	1680	24,000	60	2.36	0.34	0.23
SK216-06	10	3/8"	06	15.0	0.591	17.8	0.701	385	5,500	1540	22,000	70	2.76	0.44	0.30
SK216-08	12	1/2"	08	18.8	0.740	21.4	0.843	345	5,000	1380	20,000	90	3.54	0.54	0.36
SK216-10	16	5/8"	10	21.6	0.850	24.4	0.961	290	4,200	1160	16,800	130	5.12	0.63	0.42
SK216-12	19	3/4"	12	25.7	1.010	28.5	1.122	280	4,000	1120	16,000	160	6.30	0.84	0.56
SK216-16	25	1"	16	34.1	1.341	36.6	1.441	230	3,300	920	13,200	240	9.45	1.35	0.91
SK216-20	31	1-1/4"	20	40.5	1.594	44.7	1.760	175	2,540	700	10,200	300	11.81	1.57	1.06

4ST

Spiral hose for high-pressure hydraulic systems.

Reinforcement: Four steel wire spirals
Tube and cover: Synthetic rubber, MSHA flame retardant approved cover
Temperature: Hydraulic oils: -40°F to +250°F (-40°C to +121°C), with occasional peaks to +257°F (+125°C).

Hose	Hose ID			Reinforcement dia.		Outside dia.		Working pressure		Burst pressure		Bend radius		Weight
Hose	DN	inch	size	mm	in	mm	in	bar	psi	bar	psi	mm	in	kg/m	lb/ft
IT 4ST-10	16	5/8"	10	24.4	0.961	26.4	1.039	350	5,000	1400	20,000	100	3.94	1.00	0.67
IT 4ST-12	19	3/4"	12	27.0	1.063	29.0	1.142	350	5,000	1400	20,000	120	4.72	1.09	0.73
IT 4ST-16	25	1"	16	34.6	1.362	36.6	1.441	350	5,000	1400	20,000	150	5.90	1.95	1.31
IT 4ST-20	31	1-1/4"	20	41.9	1.650	45.0	1.772	350	5,000	1400	20,000	210	8.27	2.49	1.67
IT 4ST-24	38	1-1/2"	24	48.8	1.921	52.0	2.047	300	4,350	1200	17,400	250	9.84	3.03	2.04
IT 4ST-32	51	2"	32	63.2	2.488	66.5	2.618	250	3,600	1000	14,400	315	12.40	4.43	2.98

4ST+

Spiral hose for systems with extreme pressure peaks.

Reinforcement: Four steel wire spirals
Tube and cover: Synthetic rubber, MSHA flame retardant approved cover
Temperature: Hydraulic oils: -40°F to +250°F (-40°C to +121°C), with occasional peaks to +257°F (+125°C).

Hose	Hose ID			Reinforcement dia.		Outside dia.		Working pressure		Burst pressure		Bend radius		Weight
Hose	DN	inch	size	mm	in	mm	in	bar	psi	bar	psi	mm	in	kg/m	lb/ft
IT 4ST+ 06	10	3/8"	06	17.2	0.677	19.9	0.783	450	6,500	1800	26,000	80	3.15	0.63	0.42
IT 4ST+ 08	12	1/2"	08	20.0	0.787	22.2	0.874	420	6,000	1680	24,000	90	3.54	0.74	0.50
IT 4ST+ 10	16	5/8"	10	24.4	0.961	26.4	1.039	420	6,000	1680	24,000	120	4.72	1.00	0.67
IT 4ST+ 12	19	3/4"	12	28.2	1.110	30.1	1.185	420	6,000	1680	24,000	150	5.90	1.47	0.99
IT 4ST+ 16	25	1"	16	34.6	1.362	36.6	1.441	420	6,000	1680	24,000	200	7.87	1.95	1.31
IT 4ST+ 20	31	1-1/4"	20	41.9	1.650	45.0	1.772	420	6,000	1680	24,000	250	9.84	2.49	1.67

6ST

Large-bore spiral hose for extreme pressure peaks.

Reinforcement: Six steel wire spirals
Tube and cover: Synthetic rubber, MSHA flame retardant approved cover
Temperature: Ask the counter for the rating on your application.

Hose	Hose ID			Reinforcement dia.		Outside dia.		Working pressure		Burst pressure		Bend radius		Weight
Hose	DN	inch	size	mm	in	mm	in	bar	psi	bar	psi	mm	in	kg/m	lb/ft
IT 6ST-20	31	1-1/4"	20	44.4	1.748	47.4	1.866	450	6,500	1800	26,000	260	10.24	3.68	2.47
IT 6ST-24	38	1-1/2"	24	52.5	2.067	55.5	2.185	420	6,000	1680	24,000	315	12.40	4.40	2.96
IT 6ST-32	51	2"	32	66.9	2.634	71.5	2.815	420	6,000	1680	24,000	395	15.55	7.44	5.00

What to tell us when you order

Seven details get the right assembly built the first time. Don't have them all? Bring in the old hose.

S
Size
Inside diameter and length of the hose you need.
T
Temperature
Of the fluid, and of the air around the hose.
A
Application
What the hose does, how it routes and what it rubs against.
M
Media
What runs through it: hydraulic oil, water, fuel, chemical.
P
Pressure
Working pressure, plus any spikes.
E
Ends
Thread type, seal type and orientation of each end.
D
Delivery
Quantity, and when and where you need it.

Making hose in your own shop?

We sell the saws, blades and crimpers too, with parts and service in house.

Hose saws Hose crimpers

Not sure what you need?

Bring in the old part or call the counter. We'll help you match it.

Call (225) 383-9213 Request a quote

Hydraulic hose

Find the hose that holds your pressure

Hose specifications

F1SN

F2SN

R17 (SK117)

SK216

4ST

4ST+

6ST

What to tell us when you order

Size

Temperature

Application

Media

Pressure

Ends

Delivery

Making hose in your own shop?

Often bought together

Crimp fittings

Hydraulic adapters

Hose testing

Not sure what you need?